Nice! That's a neat setup.
@Sigmund this is a HUGE help -- hadn't read this yet before replying in the other thread, will give this a shot tomorrow! thanks!!
@Sigmund any luck figuring out the SX1262 kmod issue? I dove into it a little the last couple days but no luck here.
Found an old, "official" 7" touchscreen I had around. So, I grabbed a 22 to 15 pin DSI display flex cable and cleaned up my bench LoRa "base unit".
You are right about that sticker - we need to add it.
@TX Programmer Understood. If you notice, I haven't published any part #s. Because it could undermine your sales. I figure I paid my $399 for my parts list and others are welcome to do the s...
@J My Shift key sometimes "drops out" on the cheap wireless keyboard I use on my media system. I meant 64MB SD Card (actually 8GB would be better since it is quicker to copy/xfer, etc. But size is ...
Never mind, after getting a second device up and running. All is well.
@TX Programmer I'll reply back here once I've got it working...
I finally received my SX1262 from Waveshare and was able to build a Meshtastic image on a 32GB SD card, on an 8GB Pi5 (on my dev workbench). This image is based on the current version (as o...
no problem, appreciate the response :)
No problem! I haven't tested the nano 3, but it doesn't appear as if there should be any issue. It is advertised as having an RTL2832U chipset, which should work.
You're welcome. That's likely the SX1262 driver breaking - don't have a fix quite yet.
@TX Programmer that's helpful, thanks. do you guys have a fix for the issue Sigmund found with the SDR kmod after a `apt -y dist-upgrade` yet?
Ahhhh, That clears things up. I presumed you had it running using the internal Waveshare radio (even with its limited bandwidth). I've got one on order! :-) I presume the Nano 3 - Premium ...
The keyboard doesn't have a tab key, but you can easily remap a key of your choice. Here are the steps: In the terminal, run: sudo apt install input-remapper Once it's installed, run: i...
Re-reading this, it occurs to me you didn't specify which USB SDR dongle you're using. We're using the Nooelec NESDR Mini and that's working just fine. As for settings, start gqrx and then select ...
feel like I must be missing something.
@Sigmund logged into the forum today LITERALLY to ask about exactly this, lololol. also discovered xtrx.c was mad about something. I'm guessing that's part of the SDR hardware in the device. how do...
