It is enabled under the position tab. Under the channels tab is the white dot to the right or left enabled? Now Chromium wont load for me.

@Kirk Make sure under position tab its enabled and under the channels tab make sure position is enabled too. If have pps light and tx light flashing should be locked and reporting to the pi/meshtastic

I switched antennas to the cabled GPS antenna and now pps is flashing but still no position. When I look at my other node I can see it was heard but there is no location data. I feel it is a settin...

@Kirk pps flashing is locked need to be outside or replace atennea

Hello, I have everything installed but I think I have a setting wrong.  I am seeing my other node but I am not seeing it on the other node. I think I follwed the Youtube video for all the set...

@TX Programmer I currently took out the lora on the nomad and made a standalone node with the meshadv. I havent found a good replacement for battery power (only find this https://www.aliexpress.us/...

I've been working on a proto unit of Nomad. The idea is to integrate SDR without it hanging off the side, in a small backpack unit. I've also added a Nooelec amp here which is powered by the Nomad'...

Thanks for the updates on this. We have the Meshadv pihat inbound to integrate into the Nomad and Chris has been great to work with as well. What power supply are you using?

This is fantastic! Thank you for contributing your modifications back to the community of Nomad users. I have also been working on Nomad ideas; the SDR has been most useful and I've got that worki...

Just a quick post I fixed the nomad and have it doing everything I wanted. The setup till I doccument it: MESHADV Pi Hat (chris meyers) E22-900M30S Lora Radio Beitian BE182 GPS BME180 Temp s...

https://drive.google.com/file/d/16dXAFmrImbnOR6f63nCFr2HT9X7lnqX7/view?usp=drive_link

Hi Charles, We are working on the manual. Yes the switch on the LORA radio needs to be in the UP/ON position for the battery to charge.  Disconnecting or turning off wifi when not in use sho...

@Kirk No problem any other questions lmk. Spec5 also is working on how to address the waveshare issue so hope they figure that out for other nomad users.

@sean Thank you for the all the help, I will give it a try, as soon as I can get enough time.

What settings on the phone and device are recommended for maximal battery life? With the phone on a LoRa device off, the phone drained to shutdown in <12hr with BT/WiFi on and display off. Also...

Have to use the cable provided sadly as most are too thicc to full seat into the usbc port. If want to fix it you can make the hole larger for all cables to fit.

@J nope, it has to be replaced with something else. Waveshare refused to address the issue.

is this something that can be fixed with a firmware update?

@J https://www.youtube.com/watch?v=PND1GlMSrEM   Basically it will not handle more than 56 bytes per message over longfast and also has shown to drift off frequency causing packets to only b...