@John, Under normal use, does the device boot normally? I.e. does the device only boot up with a blank screen when you try to put it in DFU mode? If you're using Windows, when the Ranger Magnu...
@John, Under normal use, does the device boot normally? I.e. does the device only boot up with a blank screen when you try to put it in DFU mode? If you're using Windows, when the Ranger Magnu...
Hi Mark, I would recommend erasing and reinstalling the firmware. Once that's done, I would also recommend changing the bluetooth pin in settings since the default pin is the same across a l...
That's alright. The USA region works between 902-928 MHz. It's usually referred to as 915 MHz as that is the center frequency in the range. 906.875 MHz is the specific default frequency set for the...
During a test the other day flying a drone at 400ft, we got a transmission on the Meshtastic app from a user 500 miles away in Mexico! What's the farthest connection you've got...
The hardware does have audio capabilities but the meshtastic firmware in use on the device does not support this. So today you wouldn't get out of the box audio capabilities with the Ranger. We ar...
Yes, the user can connect to the device via WiFi and WiFi can also be used for MQTT.
Both operate the same with Meshtastic but the ATAK version also lets the user use ATAK out of the box. This is a convenience feature we offer our users where we preconfigure ATAK. Of course, tech s...
https://youtube.com/shorts/94aeKu9rN_s Here's SDR running on Nomad