Has anyone took the cell phone out of the case to access the SD card? I would like to put some files on there and maybe even increase the storage. My cell phone looks like there may be adhesive on ...

I have a quick question from some findings. I have found that the upspackboard is interfering with the gps signal not matter what you do. Is there a way to propperly shield the board and wires?

The UHF radio and the lora radio use the same battery but we have a diode inline so you cannot charge the battery from wisblock to prevent damage to the UHF radio. That being said it means that the...

Here is the current progress of me changing the nomad. Like the idea of a console like sigmund did. Will be battery backed up using the battery.

I'm having trouble getting the LoRa device to charge beyond 23%. Any pointers or fixes for this? I'm using the appropriate port for charging, but it seems to me that the radio portion is charging f...

@Kirk stanby the pps ligh will be solid and not flashing so you have ir right. Sounds like maybe meshtasticd is having issues? Idk how tech litterate you are but might be worth starting the install...

Hi jeffrey, The 2way radio function of the Pulse is separate from Lora/Meshtastic radio. It runs on the FRS(Family Radio Service) bands and cannot be encrypted. 

How does the 2-Way Radio function and is it limited to UHF? Can this also run an Encryption?  

The lights are both flashing. GPS is enabled in Position, not sure about in channels.  Having the round button to the left or right is enabled? I also have an issue where Chromium won't load...

It is enabled under the position tab. Under the channels tab is the white dot to the right or left enabled? Now Chromium wont load for me.

@Kirk Make sure under position tab its enabled and under the channels tab make sure position is enabled too. If have pps light and tx light flashing should be locked and reporting to the pi/meshtastic

I switched antennas to the cabled GPS antenna and now pps is flashing but still no position. When I look at my other node I can see it was heard but there is no location data. I feel it is a settin...

@Kirk pps flashing is locked need to be outside or replace atennea

Hello, I have everything installed but I think I have a setting wrong.  I am seeing my other node but I am not seeing it on the other node. I think I follwed the Youtube video for all the set...

@TX Programmer I currently took out the lora on the nomad and made a standalone node with the meshadv. I havent found a good replacement for battery power (only find this https://www.aliexpress.us/...

I've been working on a proto unit of Nomad. The idea is to integrate SDR without it hanging off the side, in a small backpack unit. I've also added a Nooelec amp here which is powered by the Nomad'...

Thanks for the updates on this. We have the Meshadv pihat inbound to integrate into the Nomad and Chris has been great to work with as well. What power supply are you using?

This is fantastic! Thank you for contributing your modifications back to the community of Nomad users. I have also been working on Nomad ideas; the SDR has been most useful and I've got that worki...

Just a quick post I fixed the nomad and have it doing everything I wanted. The setup till I doccument it: MESHADV Pi Hat (chris meyers) E22-900M30S Lora Radio Beitian BE182 GPS BME180 Temp s...

https://drive.google.com/file/d/16dXAFmrImbnOR6f63nCFr2HT9X7lnqX7/view?usp=drive_link