You are right about that sticker - we need to add it. 

Cool! Thanks.  

@TX Programmer  Understood. If you notice, I haven't published any part #s. Because it could undermine your sales. I figure I paid my $399 for my parts list and others are welcome to do the s...

@J My Shift key sometimes "drops out" on the cheap wireless keyboard I use on my media system. I meant 64MB SD Card (actually 8GB would be better since it is quicker to copy/xfer, etc. But size is ...

Never mind, after getting a second device up and running. All is well.

@TX Programmer I'll reply back here once I've got it working...  

  I finally received my SX1262 from Waveshare and was able to build a Meshtastic image on a 32GB SD card, on an 8GB Pi5 (on my dev workbench). This image is based on the current version (as o...

no problem, appreciate the response :)

No problem! I haven't tested the nano 3, but it doesn't appear as if there should be any issue. It is advertised as having an RTL2832U chipset, which should work.

You're welcome. That's likely the SX1262 driver breaking - don't have a fix quite yet.

@TX Programmer that's helpful, thanks. do you guys have a fix for the issue Sigmund found with the SDR kmod after a `apt -y dist-upgrade` yet?

Ahhhh, That clears things up. I presumed you had it running using the internal Waveshare radio (even with its limited bandwidth). I've got one on order! :-)   I presume the Nano 3 - Premium ...

The keyboard doesn't have a tab key, but you can easily remap a key of your choice. Here are the steps:   In the terminal, run: sudo apt install input-remapper Once it's installed, run: i...

Re-reading this, it occurs to me you didn't specify which USB SDR dongle you're using. We're using the Nooelec NESDR Mini and that's working just fine. As for settings, start gqrx and then select ...

feel like I must be missing something.

@Sigmund logged into the forum today LITERALLY to ask about exactly this, lololol. also discovered xtrx.c was mad about something. I'm guessing that's part of the SDR hardware in the device. how do...

@Sigmund can you expand on the bit about "building a 64Gb SDRAM from scratch using the Meshtastic guide" and "adding a 1TB NVMe?" is there already support in there for an NVMe drive? and is that gi...

Successful pair of flights with the Georgetown drone today. Thanks to all who said hi!  We saw a lot of new nodes come online. The mesh is growing...

Appreciate your interest in the Nomad, and your diligence in documenting things.  SpecFive is not trying to be a DIY company. We think the biggest service we can provide is in making these de...

Yup! I saw the writeup on Hackster and jumped right in. I was an early adopter. so mine came with a 4GB Pi. But I have an 8GB Pi I can swap in... BTW folks, NOMAD is very modular and easy to crac...